Table of Contents

---

Definitions

In this Step by Step guide the Juniper SA SSL-VPN is referred as "SSL-VPN Solution"

2 Prerequisites

You will need a server, for example a VMware virtual machine, with Windows Server 2003 or higher installed with Ethernet in bridge mode. The server must have a static ip-address configured and must also be able to reach your DNS-servers, your SSL-VPN solution and Active Directory. Since the software is quite small (315 mb) and easy to remove, you can also use any existing server from your network.

Important information regarding communication

The One Time Password Server is a software that can be installed on any existing server in your network or DMZ.

– The One Time Password Server must be able to communicate (Outbound traffic) with your LDAP or JDBC User Database. Default port for LDAP and Secure LDAP are TCP port 389 / 636.

– The SSL-VPN solution must be able to communicate (Outbound traffic) with the One Time Password Server via Radius, UDP port 1812 or 1645 (Outbound traffic).

– If you want to use the Nordic Edge SMS Gateway, the One Time Password Server must be able to communicate (Outbound traffic) with otp.nordicedge.net and otp.nordicedge.se with HTTPS on TCP port 443.

In the following test-scenario you will need to communicate with RADIUS port 1812 or 1645 and use the Nordic Edge SMS Gateway.

---

3 Getting started

Type in your name and contact details to receive the software.

You will receive a link for downloading the software. A 30 days evaluation license will be sent via e-mail when you download the software.

Download the 32 or 64 bit version depending on your platform.

4       Installation

 

Please note that if you are installing on a Windows 2008 Server you need to right click on the otp3install.exe using explorer and select “Run as Administrator”.

 

Click Next

Click Next

5   Configuring the One Time Password Server

5.1  Start the OTP Configurator

Start the OTP Configurator by clicking on button – “Configuration”              

5.2   Configure the One Time Password Server

On the Server page you can set the length of the one time password and for how long it should be valid. Default is 5 minutes.

You can also set a default country prefix, which means you will not need to set it in the mobile attribute. 

For more information regarding the optional setting please see One Time Password Server 3 – Administration manual

For now, leave this page as default and go on to the next part – Configure RADIUS.

5.3      Configure RADIUS

Change to the RADIUS tab and configure the RADIUS port you want to use to communicate with your SSL-VPN server. In this example we are using RADIUS port nb 1645.

 Click Save config.

5.4      Configure databases

In this setup we are going to use the Microsoft Active Directory LDAP database.

Change to the Databases tab and click on the LDAP Database button.

5.5      Configure LDAP Host Settings

For this configuration we will use the active directory installed on the same server as the One Time Password Server. We will use the internal IP-address (127.0.0.1) as host address.

We will use the standard LDAP port No. 389 to communicate with Active Directory.

Admin DN will be the Administrator user to search for user objects in the Active Directory database. For now this user only need read rights to the user objects attributes but be aware that later you might want to use options like disable accounts or the Pledge Enrollment concept from the Pledge Mobile Client. In this event the Admin DN need write rights to modify the disable account attribute and to store oath-keys into an optional user attribute.

Configure your LDAP host settings and click test. You should now get a messages saying “LDAP connection success”

Click OK and Save

 

Next step is to configure the LDAP database settings.

5.6   Configure the LDAP database settings

The BASE DN is the search base from where OTPServer will start looking for user objects.

Click on the button with three dots at the right side of the Base DN field to browse your LDAP Database.

Select an Organization Unit or Organization in Active Directory and click OK.

7    Configure Delivery Method

The Delivery Methods category is meant for enabling and configuring one or more delivery methods that can be used by the OTP Server to send one-time passwords.

 

One Time Password Server offers various methods like SMS, Oath Tokens, Instant Messaging, HTTP, Yubikey.

In this example we will use SMS with the Nordic Edge SMS-service as the SMS-provider.

During the evaluating phase we offer customers to use our Nordic Edge SMS-service free of charge for 30 days from the activation of the Demo Account.

In the left Pane, click “Delivery Methods” and then Nordic Edge SMS. In the right pane enable Nordic Edge SMS Gateway.

To Request a demo account click “Request a demo account”.

Click “Yes”

You should now get a success message and the Username and Password for the Nordic Edge SMS-gateway has automatically been filled in. Click OK and Save Config.

8 Restart the One Time Password Server as Windows Service

In the server panel for click “Shutdown”

In Windows Control Panel, open Administrative Tools / Services

Find the NordicEdge OTPServer Service, right click on that service and click “Start”.

9  Add mobile phone number with Microsoft Management Console

Add a mobile phone number to your test user mobile phone attribute by starting the Microsoft MMC, select the test user and enter the mobile phone number into the Mobile attribute.

10 Configuring Juniper Secure Networks SA SSL-VPN

10.1 Add RADIUS Authentication Server

Start the Juniper Secure Networks Secure Access SSL-VPN Central Manager.

Go to Authentication – Auth. Servers
–> New RADIUS Auth Server
Configure as below

Create a role mapping for the realm. Use the role created in 10.3.

When done, it should look like this

10.5      Sign In Policy

Create a Sign In Policy that uses the Sign-in Page from step 2 and the User Realm
from step 3.

Note that from the users’ perspective you can always configure the login-pages for both
graphics and text to suit your company.

10.6  Start testing

Go to your Juniper url and add that realm you have created. In this example juniper.nordicedge.se/test

Enter the user-id and password for the user that you have added your mobile number to.

You will receive a one time password to your mobile phone within a couple of seconds.

 

11      Purchase

If you want to purchase the product, you are more than welcome to contact us at e-mail sales: sales@nordicedge.se. phone: +46 8 122 07 500 fax: +46 8 122 07 508.

12     Technical questions

If you have any technical questions, please contact us at support@nordicedge.se 

 

Thank you for showing interest in our product!

The Nordic Edge One Time Password Server Team